Pattern Bodies - Tutorial 1: Placing Solid Bodies on a Curved Grip
SWPlugins Suite for SOLIDWORKS - swplugins.com

Files
  BikeBottle_PatternBodies_start.SLDPRT     the bike bottle without the grip texture, where the step by step begins
  BikeBottle_PatternBodies_finished.SLDPRT  the bottle with 353 spheres on its grip, as built in the video
  BikeBottle_PatternBodies_start.x_t        the start part as a Parasolid file

SOLIDWORKS version
  The SLDPRT files are saved in SOLIDWORKS 2025 and open in SOLIDWORKS 2025 or newer.
  With SOLIDWORKS 2023 or 2024, open the .x_t file instead and follow the tutorial from there.

Settings used in the video
  Faces: the grip's two faces
  Mode: Body
  Mapping: UV, Orientation Up Y
  Layout: Hex grid, Pitch 6 mm
  Body: Sphere, Size 3 mm, Combine Add
  Placement: Offset Y 1.95 mm
  Edges: Margin 5 mm
  Modifier: Edge distance on Size, measured from the face edge, Distance 50 mm, 25 % at the edge to 100 %
  Result in the video: 353 spheres.

Without the add-in
  The finished part opens on any computer with all its geometry. The feature keeps the shape it had when the part was
  saved; it can only be rebuilt or edited with the add-in installed (a free download, rebuilding needs no licence).
  Free 14-day trial: swplugins.com/download
