Pattern Mapper - Tutorial 1: Embossing a Pattern on a Curved Face
SWPlugins Suite for SOLIDWORKS - swplugins.com

Files
  PhoneCase_PatternMapper_start.SLDPRT     the plain case, where the tutorial's step by step begins
  PhoneCase_PatternMapper_finished.SLDPRT  the case with the embossed dot pattern, as built in the video
  PhoneCase_PatternMapper_start.x_t        the plain case as a Parasolid file

SOLIDWORKS version
  The SLDPRT files are saved in SOLIDWORKS 2025 and open in SOLIDWORKS 2025 or newer.
  With SOLIDWORKS 2023 or 2024, open the .x_t file instead and follow the tutorial from there.

The phone case
  A demo case in the published size of a Pixel 10 (152.8 x 72.0 x 8.6 mm). The corner radius and the camera
  opening are estimates; the case is not fit-checked for a real phone.

Settings used in the video
  Mapping: Flatten, Orientation Up Y
  Layout: Sunflower, Pitch 4.2 mm
  Shape: Circle, Size 3.4 mm
  Placement: Offset X -18 mm, Offset Y -40 mm
  Edges: Margin 3 mm
  Output: Emboss, Height 0.6 mm, Walls Straight
  Modifier 1: Point attractor on Size, X -18 mm, Y -40 mm, Radius 90 mm, 25 % at the source, 105 % away
  Modifier 2: Edge distance on Size, measured from the margin, Distance 8 mm, 30 % to 100 %
  Result in the video: 372 dots.

Without the add-in
  The finished part opens on any computer with all its geometry. The pattern feature keeps the shape it had when
  the part was saved; it can only be rebuilt or edited with the add-in installed (a free download, rebuilding needs
  no licence). Free 14-day trial: swplugins.com/download
