Surface Displace - Tutorial 1: Turning an Image into a Relief on a Curved Face
SWPlugins Suite for SOLIDWORKS - swplugins.com

Files
  WaterBottle_SurfaceDisplace_start.SLDPRT     the water bottle without the relief, where the step by step begins
  WaterBottle_SurfaceDisplace_finished.SLDPRT  the bottle with the lion relief, as built in the video
  WaterBottle_SurfaceDisplace_start.x_t        the start part as a Parasolid file
  lionshead.png                                the grayscale image used for the relief (white = high, black = flat)

SOLIDWORKS version
  The SLDPRT files are saved in SOLIDWORKS 2025 and open in SOLIDWORKS 2025 or newer.
  With SOLIDWORKS 2023 or 2024, open the .x_t file instead and follow the tutorial from there.

Settings used in the video
  Faces: the bottle's upper side (one face, all the way around)
  Mapping: Cylindrical (found by itself for a face that goes all the way around)
  Image: Source File, lionshead.png
  Placement: Tile off, Image width 63.76 mm, Offset X 50.03 mm (a quarter of the way around)
  Displacement: Amplitude 3 mm
  Edges: Edge fade 3 mm, Fade curve Smooth
  Output: Solid
  The image is stored in the feature: the finished part rebuilds without the PNG file.

Without the add-in
  The finished part opens on any computer with all its geometry. The feature keeps the shape it had when the part was
  saved; it can only be rebuilt or edited with the add-in installed (a free download, rebuilding needs no licence).
  Free 14-day trial: swplugins.com/download
