How to create in-between curves (a blend) between two sketch curves in SOLIDWORKS
SOLIDWORKS has no blend between two different sketch curves: Offset Entities copies one curve, and patterns repeat it. The usual routes are the Blend tool of a drawing program and a DXF import, or a surface between the curves to take curves from. Sketch Blend creates the in-between curves inside the sketch, as native lines, arcs and splines that follow when you edit the two source curves.
Video (0:43, English): Blend curves in SOLIDWORKS without the Illustrator round trip. Also on YouTube.
What SOLIDWORKS offers built in
- Offset Entities makes parallel copies of one curve. The copies do not move towards a second shape.
- Linear and Circular Sketch Pattern repeat a shape unchanged.
- Drawing programs have a Blend tool, but the result comes back as a DXF: no link to the sketch, and often in many small pieces.
- A Loft or Boundary Surface between the two curves is a real transition, but it is a surface: curves have to be taken off it one by one, and they do not stay lines and arcs.
In-betweens with Sketch Blend
- 01Inside an open 2D sketch select the two curves (or chains), then right-click › Sketch Blend….
- 02Set the Number of steps, or a Distance: the largest gap allowed between neighbouring curves.
- 03The in-betweens show as yellow lines while you adjust. Easing bunches them at the start, the end or both.
- 04Closed shapes that twist: move the Start point shift. Reverse direction runs one end the other way round.
- 05OK writes the curves. They follow when you edit the source curves; select one and start Sketch Blend again to change the settings.
How shapes blend
- Shapes with as many segments on both sides blend segment by segment: corners stay sharp, and lines, arcs and circles stay lines, arcs and circles.
- Convex shapes of different kinds, such as a square and a circle, blend by direction: a square passes into a circle through rounded squares made of real lines and arcs.
- Other shapes, such as a star into a circle, are blended along both curves: lines where both sides are straight, splines with few points elsewhere.
- Two splines with the same number of points keep their points.
Good to know
- Delete or move an in-between and the blend lets go: its curves stay as plain sketch geometry. Undo brings the blend back.
- Right-click › Dissolve Sketch Blend turns the in-betweens into plain sketch geometry on purpose.
- For construction creates them as construction geometry, for example as guides for a pattern or ribs.
Try it on your own part
Sketch Blend is part of Advanced Sketching, a module of the SWPlugins Suite, a SOLIDWORKS add-in (2023 or newer). Every tool works free for 14 days; a licence is €149.25 plus VAT for the whole Suite, single modules from €44.25 (launch price until 30 November, regular €199 and from €59), one-time.
Docs: Sketch Blend
Questions
Yes, while the blend is intact. Edit a source curve and the in-betweens follow.
No, in 2D sketches. For curves on a curved face, map the finished sketch onto the face with Pattern Mapper in Curves mode.
With Lines, arcs, circles stay exact on, in-betweens are lines, arcs and circles wherever they can be, and splines only where the shape is a free curve.