Pattern Mapper – Tutorial 1
Embossing a pattern on a curved face. Pattern Mapper step by step: 372 dots embossed on the curved back of a phone case in SOLIDWORKS, with a sunflower layout, a point attractor and an edge fade. The start part and the finished part to download.
Video (5:50, English, subtitles). It plays from YouTube: nothing is loaded from YouTube before you press play.
The parts to download
A phone case in the size of a Pixel 10 with a gently domed back (a demo case: corner radius and camera opening estimated).
- The plain phone case (SOLIDWORKS 2025)
- The finished case with the embossed dots (SOLIDWORKS 2025)
- The plain case as a Parasolid file (for SOLIDWORKS 2023 and 2024)
- A README with every setting
The finished part opens without the add-in, with all its geometry; to rebuild or edit the feature, install the add-in (rebuilding needs no licence).
The settings in the video
Transcript
Introduction
Pattern Mapper, tutorial one. Embossing a pattern on a curved face in SOLIDWORKS. In this video: from the plain case to this one, step by step. Pattern Mapper is made for curved faces. To keep the steps easy to follow, this tutorial uses a phone case with a gently domed back. Later tutorials show it on a bike bottle, curved in both directions.
What it's for
Pattern Mapper puts a pattern of shapes onto curved faces, as real geometry. Dots, slots, cells, text. Here every dot is a real raised pad on the solid. Not a decal, not a texture. You can measure it, section it, and send it to the mould maker. It can raise the shapes, or cut them in, punch them through, or just split the face along them. And it stays one feature. Change a number, and the whole pattern follows. For a smooth relief from an image, that's Surface Displace. For separate bodies like spheres, Pattern Bodies. And for a faceted texture with sharp creases, Geometric Surface. Each of them has its own tutorial.
How it works
You pick the faces, then start Pattern Mapper. It opens in two places. On the left, the page: every setting, in groups. The groups are in the same order in every pattern tool: the faces, the mapping, the layout and shape, the placement, the edges, and the output. Once you know one tool, you know where things are in the others. On the right, the Task Pane. This is the face, unfolded flat. The pattern is laid out here first, in two dimensions. Then every shape is wrapped back onto the curved face, so the dots keep their size, also where the face curves away. How the face is unfolded is the mapping. Flatten works for most single faces. UV follows the face's own grid, and Cylindrical is made for bottles and vases. Modifiers change the pattern locally: bigger here, smaller there, rotated, or hidden. They're what make a pattern look designed instead of stamped. And the preview. Fast shows a light mesh on the model while you change things. OK builds the real feature.
Step by step
Here's the plain case. You can download it below and follow along. It's a demo case in the size of a Pixel 10, with a slightly domed back. Select the back face, and start Pattern Mapper. One face, gently curved: Flatten. Orientation, up along Y, so the camera opening is at the top of the canvas. For the layout, a sunflower. It grows from one point outward, with no rows that look mechanical. Pitch, four point two millimetres. Shape, a circle, three point four millimetres across. A margin of three millimetres keeps the dots off the edge, and away from the camera opening. Output: Emboss, zero point six millimetres high, with straight walls. It's already there on the model. An even pattern, for now. Let's give it a direction. Move the sunflower's centre to the lower left corner. The rings now sweep across the case. Now the first modifier: a point attractor on the size. Small dots at the centre, a quarter of their size, growing to just over full size ninety millimetres away. That's the burst. A second one: edge distance. It shrinks the dots over the last eight millimetres before the margin, so the pattern fades out instead of stopping at a hard line. Every edge counts, and one click on a side in the canvas leaves it out. OK builds the feature. Three hundred seventy-two dots, in about twenty seconds. Each one a real pad with straight walls. Here's a section through them. And it stays editable. Edit the feature, a bigger pitch, OK. The whole pattern is laid out again, and the modifiers with it. Back to four point two.
What else you can do
One list changes the job. Deboss cuts the same dots in. Split line only splits the face, for a second colour or a second material. Cells instead of dots, cut through the wall: a Voronoi back. For moulded parts, the walls can follow a pull direction, with draft. And in the next tutorial: spheres on a bike bottle. That's Pattern Bodies. The start file and the finished case are on swplugins.com. The link is below. Pattern Mapper is part of Advanced Patterns. Try it free for fourteen days, the link is in the description.
Try it on your own part
Pattern Mapper is part of Advanced Patterns, a module of the SWPlugins Suite, a SOLIDWORKS add-in (2023 or newer). Every tool works free for 14 days.