Pattern Bodies – Tutorial 1
Placing solid bodies on a curved grip. Pattern Bodies step by step: 353 spheres placed on the curved grip of a bike bottle in SOLIDWORKS, fading toward the edges, then turned into cylinders and dimples. The start part and the finished part to download.
Video (4:05, English, subtitles). It plays from YouTube: nothing is loaded from YouTube before you press play.
The parts to download
A bike bottle whose grip is two faces, curved in both directions.
- The bike bottle without the grip texture (SOLIDWORKS 2025)
- The finished bottle with 353 spheres (SOLIDWORKS 2025)
- The start part as a Parasolid file (for SOLIDWORKS 2023 and 2024)
- A README with every setting
The finished part opens without the add-in, with all its geometry; to rebuild or edit the feature, install the add-in (rebuilding needs no licence).
The settings in the video
Transcript
Introduction
Pattern Bodies, tutorial one. Placing solid bodies on a curved grip in SOLIDWORKS. In this video: from the plain bottle to this grip, step by step.
What it's for
Pattern Bodies places solid bodies at the points of a pattern: spheres, boxes, cylinders, cones, pyramids, prisms, or a body you modelled yourself. Each one is added to the part, or cut out of it. Real geometry, in one feature. For raised shapes with an outline, like dots or text, Pattern Mapper embosses them instead.
How it works
Pick the faces, here the grip's two faces, the second with Control. Then Pattern Mapper. It's the same page for patterns and for bodies. Mode, Body. The page opens again, now with a Body group: every point of the pattern becomes a solid. The groups are the ones you know: the faces, the mapping, the layout. Then the body, the placement, the edges, and the output. The body: a sphere, a box, a cylinder, a cone, a pyramid, a prism, or a custom body of your own. Combine: add them to the part, cut them out, or keep them as separate bodies. In the Task Pane each body shows as its footprint, so you see where they land before anything is built. Each body stands on the surface along its normal, with a short skirt below it, so it meets the curve without a gap.
Step by step
Here's the bottle without the grip texture. You can download it below. The grip is two faces, curved in both directions. Select both grip faces, the second with Control. Start Pattern Mapper. Mode, Body. The two faces continue each other, so UV maps them as one strip, up along Y. A hex grid, six millimetres apart. A sphere, three millimetres across. The rows centred on the grip, and a margin of five millimetres. Combine: Add. The fast preview shows the spheres as a light mesh on the bottle. Now the edge modifier. Measured from the face's edge, the spheres shrink to a quarter of their size there, and reach full size fifty millimetres in. OK. Three hundred fifty-three spheres, in about eight seconds. Each sphere is joined to the bottle's wall. And it stays editable. Edit the feature, cylinders instead of spheres, OK. Every body is replaced. Back to spheres.
What else you can do
One list changes the job. Cut turns the same layout into dimples. Through a wall, they become holes that stay normal to the surface: about three hundred in this stool's curved seat. The start file and the finished bottle are on swplugins.com. The link is below. Pattern Bodies is part of Advanced Patterns. Try it free for fourteen days, the link is in the description.
Try it on your own part
Pattern Bodies is part of Advanced Patterns, a module of the SWPlugins Suite, a SOLIDWORKS add-in (2023 or newer). Every tool works free for 14 days.