Tutorials / Advanced Patterns

Surface Displace – Tutorial 1

Turning an image into a relief on a curved face. Surface Displace step by step: a lion relief from a grayscale image on the curved shoulder of a water bottle in SOLIDWORKS, as real NURBS geometry instead of a mesh, then leather and knurl textures from the presets. The start part, the image and the finished part to download.

Video (4:18, English, subtitles). It plays from YouTube: nothing is loaded from YouTube before you press play.

The parts to download

A water bottle whose upper side is one face, all the way around.

  • The water bottle without the relief (SOLIDWORKS 2025)
  • The finished bottle with the lion (SOLIDWORKS 2025)
  • The start part as a Parasolid file (for SOLIDWORKS 2023 and 2024)
  • The lion image (grayscale PNG)
  • A README with every setting

The finished part opens without the add-in, with all its geometry; to rebuild or edit the feature, install the add-in (rebuilding needs no licence).

The settings in the video

FacesThe bottle's upper side (one face, all the way around)
MappingCylindrical
ImageFile: lionshead.png
PlacementTile off, image width 63.76 mm, Offset X 50.03 mm
DisplacementAmplitude 3 mm
EdgesEdge fade 3 mm, smooth
OutputSolid
ResultOne lion relief, the full preview in about 1.5 seconds

Transcript

Introduction

Surface Displace, tutorial one. Turning an image into a relief on a curved face in SOLIDWORKS. In this video: from the plain bottle to this lion, step by step.

What it's for

Surface Displace pushes a face in or out by a grayscale image. Bright is high, dark stays flat. SOLIDWORKS' own 3D Texture makes a relief like this as a mesh: seven hundred seventy-two thousand triangles, and not a solid. Surface Displace makes real NURBS geometry instead, smooth faces of the solid. You can section it, measure it, and send it to the mould maker. Besides images, it makes textures: leather, knurls, and more. For shapes with an outline, like dots or text, Pattern Mapper is the tool.

How it works

Pick the faces, then start Surface Displace. It opens like the other pattern tools: the page on the left, the Task Pane on the right. The groups are the ones you know: the faces, the mapping, the image, the displacement, the placement, the edges, and the output. In the Task Pane, the face is unfolded flat. The image is laid on it there, so you see where the relief goes. The image is a file of yours, or a texture made by the tool. Presets give you a start: sand, leather, wood, a knurl, and more. Amplitude is how far white goes out. Black stays on the face. Edge fade takes the relief down to zero before the edge of the face, so it meets the rest of the part without a step. Output: replace the face, make a separate surface body, or a whole new solid. And the preview: Fast shows a light mesh while you work. OK builds the real feature.

Step by step

Here's the bottle without the lion. You can download it below, with the image. Select the bottle's upper side. Start Surface Displace. The face goes all the way around, so the mapping is Cylindrical by itself. Source: File. Load image, and the lion. One image, not tiled. Sixty-four millimetres wide. Offset X, fifty millimetres: a quarter of the way around, onto this side of the bottle. Amplitude, three millimetres. An edge fade of three millimetres. Output: Solid. The lion becomes part of the bottle. The fast preview shows it on the bottle. Full preview now builds it once. A tick: it built without a problem. OK takes the preview's build. Done. Smooth all over, and three millimetres at its highest. And it stays editable. Edit the feature, two millimetres instead of three, OK. The lion gets flatter. Back to three.

What else you can do

One list changes the job. A texture instead of an image: leather grain, here. Or a diamond knurl. And the output can be a surface body, to model on. The start file, the image and the finished bottle are on swplugins.com. The link is below. Surface Displace is part of Advanced Patterns. Try it free for fourteen days, the link is in the description.

Try it on your own part

Surface Displace is part of Advanced Patterns, a module of the SWPlugins Suite, a SOLIDWORKS add-in (2023 or newer). Every tool works free for 14 days.